setro miniK10m, Руководство по эксплуатации

Страница: 5 / 32

Contactless card lock can be used with three types of cards: “User Card,
Service Card and Master Card”. Also, the lock can be used with a password
by selecting the user card free operation. Service card is passive by default.
You should center the card when holding over the keypad to enable accurate
reading. Since the device enters the sleep mode to offer low
energy consumption, you need to wake the lock
up by pressing any button before each operation.
Assign Master card:
1- Press , two tone beep is heard.
2- And then present the master card to the keypad until one tone beep
is heard and green led blinks.
Selecting Operation option of the miniK10:
1- Press , present the master card to the keypad and press ,
green and red leds blink.
2- Press 1 for selecting operation options. And then
Press 0 for personal operation with card.
Press 1 for locker mode operation with card.
Press 2 for cardless personal operation.
Press 3 for cardless locker mode operation.
Press 4 for locker mode operation card or password.
Usage:
Initial setup:
This step is valid if
there is no assigned
Master Card before.
5