setro miniK10m, Руководство по эксплуатации

Страница: 30 / 32

NOTE: Read instructions, set combination and test lock
BEFORE installing!!
Replacing existing lock:
1. Place mounting template centered on existing hole and mark upper
mounting screw hole.
2. Drill mounting screw hole.
3. Install lock using adaptor if necessary.
4. Thread nut on cylinder.
5. Install mounting screw
6. Tighten both nut and mounting screw.
7. Test operation of lock
New Install:
1. Place mounting template on door and mark upper mounting
screw hole and lower cylinder hole
2. Drill mounting screw hole and cylinder holes.
3. Continue steps 4-7 above
NOTE: Before drilling holes, make sure miniK10 is positioned with proper
clearance for cam to work.
If you are going to install
the lock cam in the locked
position, make sure that
the handle is in the locked
position.
If you are going to install the
lock cam in the unlocked
position, make sure that the
handle is in the unlocked
position.
LOCKED
POSITION
UNLOCKED
POSITION
30