10
Fig. 3-8 Installed plugs on unused openings in the base.
Connect the pressure tubes to the high and low pressure ports. Wire to the electrical terminals
on the back of the housing. If desired, place electrical plugs on the unused holes in the base.
Complete the installation by installing the bezel onto the base by aligning the two and pushing
the bezel into the base until the bezel snaps to the base on the 2 sides. Be sure to carefully
align the 2 parts and push straight in. There are alignment features on the front bezel and rear
housing.
4.0 Menu navigation and configuration
The LCD display is standard on all SRIM products, the display provides valuable feedback during
configuration and for user feedback in the normal and alarm modes.
The SRIM1 has a non backlit LCD display and alarms on pressure. The SRIM2 has a 3 color
backlight, a digital input for a door switch, 2 analog inputs for temperature and humidity and 1
relay output for remote alarm indication. It can alarm on Pressure, temperature and humidity
parameters.
