21
As soon as the thumb drive is connected to the MRMS, it will be recognized and bring up a
Drive Connected menu.
1.
Select Configuration Write to transfer the master MRMS configuration from the unit to
the thumb drive
Note:
The configuration file is labeled PCCONFIG.txt.
2.
Select START to initiate the copy operation.
Remove the thumb drive and cable and move to the first "slave" unit to be configured. With
power applied to that unit, connect the thumb drive and cable. Select Configuration Read to
write the master configuration to the new slave unit.
A Write Process Successful message will appear if the configuration has been written to
memory. Review the various Menu screens of the slave unit and subsequent units to confirm
the proper configuration is stored. Updating Firmware
