SetPower RV45S, Руководство пользователя

Страница: 7 / 12

The device is equipped with a multi-level battery monitor that protects your vehicle battery against
excessive discharging when the appliance is connected to 12/24V supply.
If the appliance is operated when the vehicle ignition switched off, the appliance switches off
automatically as soon as the supply voltage falls below a set level.
The appliance will switch back on once the battery has been recharged to the cut in voltage level.
Press and hold button for several seconds until the desired setting is reached.
SET
Battery
Protection
Mode Input Power: 12V Input Power: 24V
LOW
When 9.6V, it’s off: when
10.9V, it’s on.
When 21.3V, it’s off: When
22.7V, it’s on.
MID
When 10.1V, it’s off: when
11.4V, it’s on
When 22.3V, it’s off: When
23.7V, it’s on.
HIGH
When 11.1V, it’s off: when
12.4V, it’s on.
When 24.3V, it’s off: When
BATTERY MONITOR
25.7V, it’s on.
● Your fridge has built in battery protection and needs a minimum 10.9 V to start and 9.6 V to continue
operating.
● During operation a load is placed on the power supply and voltage can drop by as much as 2 V, especially
if the wiring in insuf
fi cient (less than 6mm direct to battery) or if there is a loose connection somewhere.
● If this occurs when you try and start your SetPower and the power supply drops under 10.9 V it will not start.
If this occurs when your SetPower is running and the power supply drops below 9.6 V it will stop.
COMMON 12V POWER SUPPLY ISSUES
Wiring
Often the standard wiring from the car battery to the 12V outlet is too small.
A minimum 6mm automotive wiring should be used and the earth should bewired directly back to the battery.
Battery
The car battery could be old, undersized or have a dead cell causing too much voltage drop.
Connections
The 12 V plug, car 12 V socket or any of the connections between the fridge and the battery could be faulty
or have come loose since installation.
CUT IN / CUT OUT
5. OPERATION OF RV45S
05