Sethco ZKX 3/4CS, Руководство по эксплуатации

Страница: 4 / 14

SAFETY RULES FOR SETHCO VERTICAL PUMP MODEL ZKX
SETHCO
A Met-Pro Fluid Handling Technologies Company
Thermoplastic Pumps
Congratulations: You have just purchased a SETHCO PUMP, a quality industrial product manufactured to exacting standards.
Thank you for choosing a SETHCO product. We look forward to serving your future requirements for quality industrial corrosion
resistant pumps and filter supplies.
To insure prolonged life of your purchase, please take time to review and understand completely the operating instructions and
become familiar with the pump before installing, filling, operating or maintaining this equipment.
INSTALLATION – OPERATION – MAINTENANCE of this equipment must be performed by trained and qualified personnel in strict
accordance with the operating instructions and all applicable drawings, specifications and codes.
Obtain, read and understand the MSDS (Material Safety Data Sheet) for the liquid being handled before installing, filling,
operating or maintaining this equipment.
Obtain instructions from the Safety Engineer responsible for your facility before installing, filling, operating or maintaining this
equipment and connected systems.
The equipment as received has been chosen for a certain application or service. DO NOT USE for any other application unless writ-
ten permission is obtained from the SETHCO factory. Consult the SETHCO factory with all of the service requirements so that we
can assist you in a successful reapplication.
Always wear appropriate protective apparel when working on or around the pumping equipment. Gloves, aprons, footwear, faceshield
and/or breathing apparatus and any other protective gear as needed for protection or as required by facility or operating
procedures.
All unauthorized personnel should be kept a safe distance from any and all work areas.
Keep hands, fingers, or tools from contacting the impeller during operation of the pump and system. Disconnect, lock and tag out
the main power source to prevent accidental start up.
Always keep face away from openings in the pump equipment. DO NOT look into hose, pump discharge or suction connections.
All auxiliary equipment such as hoses must be suitable for the chemical to be transferred. They must also be selected to safely
contain the system pressure at the operating temperature. All hose clamps must be of a material that will not be attacked by
corrosive environment or splashing of pumped liquid.
All connections should be checked for a secure liquid tight fit prior to filling and/or operating pump equipment or system.
Never turn pump on unless discharge and suction valves are open.
When connecting or wiring motor, follow all applicable electrical and safety codes.
Protect the power cable (when applicable) from sharp objects.
DO NOT
crimp or bind the power cable and never allow the cable to
come in contact with water, oil, grease, hot surfaces, or chemicals.
Disconnect, lock and tag out the main power source to the motor before handling the pump/motor for any reason. Lock and tag out
the switching device to prevent the unexpected application of power.
FAILURE COULD RESULT IN SEVERE INJURY OR DEATH .
Avoid touching the exterior surface of the motor. It may be hot enough to be painful or cause injury.
Isolate the pump by closing suction and discharge valves prior to any maintenance. Lock and tag out the valves to prevent
accidental opening.
Do not attempt to perform any maintenance on the pump/motor unit until you are confident that the pump and its contents have been
neutralized and stabilized at ambient temperature and atmospheric pressure.
FAILURE COULD RESULT IN SEVERE INJURY
OR DEATH
.
Sethco
800 Emlen Way, Telford, PA 18969
Tel: 215-799-2577 • Fax: 215-799-0920
w ww ww w..s se etth hc co o..c co om m •• iin nffo o@ @s se etth hc co o..c co om m
3