SES SAT2 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 19

SES SAT2 Скачать руководство пользователя страница 7

S A T 2 U S E R / I N S T A L L E R G U I D E

SAT2 Programming Cont.

How To Put in a Single Phone Number

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to

key in 110, followed by the phone number, and

Example: To make the SAT call 555 -1212, key in 110 5551212

You can key in up to 16 digits, for long distance or toll free numbers.

How To Take Out or Remove a Phone number.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to
key in 110, followed by 0, and

Example: To make the SAT erase 555 -1212, key in 110 0

How To Call from a PABX.

SAT2 can be used behind most Private Automatic Branch Exchange (PABX) systems.

The PABX must be able to send and receive Touch-Tones. Some systems need to dial

an 8 or a 9, and pause briefly before dialing the phone number. The # key on your

phone will add a 5 second pause.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to

key in 110, followed by 9 # the phone number, and

Example: To make the SAT dial 555 -1212, from behind a PABX that uses 9 to get an

outside line, and requires a pause, key in 110 9 # 555 1212

The 9 and the # both count as one digit each of the maximum allowable 16
digit phone number.

For example, if you had to dial a long distance number

from another country to the United States and your PABX required a 9 second

pause (needs two # keys) your number would be: 9 # # 01 1 800 342 5737. This

is 16 digits long.

How To Change SAT2 Talk Time.

SAT2 can be set to stay active for conversation from 1 to 99 minutes. The factory

default talk time is 1 minute. It beeps 3 times, 10 seconds before disconnecting.

After getting into program mode, (see Pg. 3) use your Touch-Tone™ phone to

key in 31 and two digits from 01 to 99 and

Installers Note

«
...
5
6
7
8
9
...
»

Содержание SAT2




















Отзывы:

Нет отзывов