SES SAT2 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 19

SES SAT2 Скачать руководство пользователя страница 12

S A T 2 U S E R / I N S T A L L E R G U I D E

he operation of SAT2 is straight forward from the users’ point of view.

Simply push the button. When the PUSH FOR HELP button is depressed,

the red CALLING light will turn on. There will be a brief

dial tone to let the user know SAT2 is starting the call

The SAT2 MUST sense a dial tone within 6 seconds, or it will hang up, and
not automatically re-dial again.

After the button is pushed, pushing on it again, (until call is completed) is
ignored.

The audio will be disabled momentarily to keep the dialed number

confidential. After dial out, SAT2 enables the audio to let the caller hear the progress

of the call. If there is no answer, or the line is busy, or there is a circuits busy (reorder),

SAT2 will hang up. If additional numbers (up to 10 total) have been programmed,

SAT2 will automatically dial the next available phone number (See Pg. 6).

Once the dialed number has been answered, two-way conversation may begin.

Conversation may go on for whatever length of Talk Time was programmed (1 to 99

minutes, see Pg. 4). 10 seconds before SAT2 times out, it will send three beeps to alert

both caller and called party that SAT2 is about to disconnect.

The called party may force SAT2 to hang up before Talk Time times out
by pressing # on the called party’s phone.

If SAT2 ID Cycle Time has been set (See Pg. 5), it will transmit a 4 digit

at the programmed intervals (anywhere from 10 to 90 seconds in 10

second increments). If ID Cycle Time was set to 00 (disabled) it will send only when

from the called party. This is called ID on Command.

While SAT2 is transmitting ID, ID tones may sometimes interfere with

conversation.

Installers Note

«
...
10
11
12
13
14
...
»

Содержание SAT2




















Отзывы:

Нет отзывов