Servomech S.p.A.
16.20-25-27-28.E - Rev. 00 DD (M/Y) 12/19
25
•
Fit the actuator to the plant in order to have ONLY axial load applied to the actuator.
•
Check the correct alignment between front and read pins: they must be PARALLEL.
•
Check the correct alignment between the actuator and the moving parts.
Figure 6.9 – Load on actuator: a) correct; b) not correct
RIGHT WORKING OF THE ACTUATOR AND PLANT CANNOT BE GUARANTED IF SIDE OR NOT AXIAL
LOAD ARE APPLIED TO THE ACTUATOR.
6.10
Installation of rod end fitting elements
To install a mounting element on the rod end threaded bore (BA), use a wrench flat on the rod end
to counterhold the locking torque.
Fix the threaded element with Loctite 270.
To unmount the element, heat the threaded area to unlock it.
Unscrew the fitting element counterholding the torque with a wrench flat on the rod end.
Figure 6.10 – Installation of rod end fitting element
