W A S H I N G
M A C H I N E
9
SM1602
Fig 7
Fig 8
Fig 9
LEVELLING THE APPLIANCE
Having completed the electrical connections, move your appliance to its operating position. To minimise
vibration and noise during spinning your appliance must be level and in firm contact with a well supported or
preferably solid floor. Failure to level the appliance could lead to instability and consequent damage to adja-
cent equipment.
Suspended, wooden floors or plinths might be needed to distribute the weight evenly.
1
One or both of the front feet should be adjusted in order to level the
appliance. The back feet also need to be secured by adjusting the nuts.
(Fig 7).
2
Screw the foot up or down until the appliance is level in both front to rear
and side to side directions. Turn feet clockwise to lower the appliance
(Fig 8).
3
Lock the feet by screwing up the nuts using a 16mm spanner so that
they are in firm contact with the underside of the machine (Fig 9).
