ServerNet LS24I, Руководство пользователя

Страница: 14 / 41

Apr, 2016 LS24I/M User guide
Copyright ServerNet S.r.l. 2015-2016, All Rights Reserved
1.4.2. Precautions
Observe all warning lights on the LS24I/M (see following chapter
Do not immerse the LS24I/M in solvents or cleaners. Clean the LS24
surface with a soft cloth dampened with a hospital grade cleaning solution.
If in use in medical environment and hospitals, the LS24
connected to biomedical devices and power sources which meet UL 60601
1 3.1 Edition requirements.
Since LS24I/M is designed to load and support third part
ServerNet can not be responsible for eventual damages related to:
•
third part Configuration wanted or unwanted behaviours such as
incorrect parameter definition, loading, design issues,…
•
correct running of any third part loaded Configuration
o
Configuration parameter updates and upgrades
o
source/destination biomedical device firmware changes and
revisions.
Please, refer to third part Configuration documentation from the
Configuration producer to know how to operate with the device and with
the Configuration loaded on device running mode.
1.4.3. Notes
Both models LS24M and LS24I comply with Part 15 of the FCC Rules.
The LS24I/M can be equipped with a WiFi radio module for
connection to an existing wireless LAN.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including that which
may cause undesired operation.
For WiFi module certification see related FCC ID on the device
label.
If the LS24I/M is equipped with a WiFi radio module, according to EMC
recommendations and if it is not differently stated by your
Organization, it is recommended to place the device antenna no less than
LS24I/M
14
(see following chapter 1.6.1).
in solvents or cleaners. Clean the LS24I/M
surface with a soft cloth dampened with a hospital grade cleaning solution.
If in use in medical environment and hospitals, the LS24I/M shall only be
which meet UL 60601-
support third part Configurations,
damages related to:
wanted or unwanted behaviours such as
,…
onfiguration in relation with:
upgrades,
medical device firmware changes and
documentation from the
producer to know how to operate with the device and with
with Part 15 of the FCC Rules.
equipped with a WiFi radio module for wireless
(2) this device must accept any interference received, including that which
module certification see related FCC ID on the device certification
, according to EMC
recommendations and if it is not differently stated by your Responsible
, it is recommended to place the device antenna no less than