KVM over IP Module
79 / 99
5.5.5 Serial
Port
Figure 5-27 Serial Port
The IP-KVM Serial Settings allows you to specify what device is connected to the serial port
and how to use it.
Configuration or console login
Do not use the serial port for any special function, use it only for the initial configuration.
Modem
The IP-KVM offers remote access using a telephone line in addition to the standard access
over the built-in Ethernet adapter. The modem needs to be connected to the serial interface
of the IP-KVM .
Logically, connecting to the IP-KVM using a telephone line means nothing else than
building up a dedicated point-to-point connection from your console computer to the
IP-KVM. In other words, the IP-KVM acts as an Internet Service Provider (ISP) to which
you can dial in. The connection is established using the Point-to-Point Protocol (PPP).
Before you connect to the IP-KVM, make sure to configure your console computer
accordingly. For instance, on Windows based operating systems you can configure a
dial-up network connection, which defaults to the right settings like PPP.
The Modem Settings panel allows you to configure the remote access to the IP-KVM
using a modem. The meaning of each parameter will be described below. The modem
settings are part of the serial settings panel.
Содержание KVM over IP Module
Страница 1: ...KVM over IP Module User Manual...
Страница 61: ...KVM over IP Module 61 99 Figure 5 15 User Console Setting...
Страница 75: ...KVM over IP Module 75 99 Figure 5 23 IP Filter Settings...
