serverLink KVM over IP Module, Руководство пользователя

Страница: 49 / 99

KVM over IP Module
49 / 99
may reduce the connection speed.
Select the drive you would like to redirect. All available devices (drive letters) are shown here.
Please note that the whole drive is shared with the remote computer, not only one partition. If you
have a hard disc with more than one partition all drive letters that belong to this disc will be
redirected. The Refresh button may be used to regenerate the list of drive letters, especially for an
USB stick.
Warning
Please be cautious that if “Allow Write Support” is
selected, all data on the shred media might be destroyed.
Write Support
This feature may be enabled here. Write support means that the remote computer is allowed to write
on your local drive. As you can imagine, this is very dangerous. If both the remote and the local
system try to write data on the same device, this will certainly destroy the file system on the drive.
Please use this only when you exactly know what you are doing.
Device Authentication
The factory default Username is “super” and the default Password is “pass”.
Click
Connect to redirect drive
Warning
1. Drive Redirection is only possible with Windows 2000 or later versions.
2. The Drive Redirection works on a low SCSI level and the SCSI protocol cannot recognize
partitions; therefore the whole drive selected will be shared instead of any particular
partition.
3. While connecting to a legacy KVM switch, please select PS/2 mouse for Keyboard/Mouse
setting from webpage. Otherwise you will not be able to use Hot-key.
Navigation Buttons:
Connect/Disconnect
To establish the drive redirection, please press the Connect button once. If all the settings are
correct, the status bar displays that the connection has been established, the Connect button is
disabled and the Disconnect button is enabled.