Page 10
TAKE-DOWN & DISASSEMBLY
FLUSH & RINSE PUMP
4
REMOVE INTERNAL JAR WITH LID
3
Place lower end of pump into container of
hot water. Pump until all remaining product
is expelled and only water flows from
discharge tube.
DISASSEMBLE
5
POWER DOWN
1
Turn power switch to the "Off" position and
unplug unit from the power source.
REMOVE LID
2
Pull locking spring pin(s) out on the back
of the lid and pull lid up then slide the lid
forward to disengage lid slots from the
shroud tabs on front of the unit.
Sliding lid forward
to disengage lid
slots from shroud
tabs
Pulling locking
spring pin out to
unlock the back of
the lid
Slide back panel off of shroud and pull out jar
and lid. Internal food holding jar and lid are
dishwasher safe.
