Serva
03
34
Serva
DETALJSLIP
Siffrorna i nedanstående text motsvarar bilderna på sidan 2
För din egen och andras säkerhet ska du läsa dessa instruktioner noga innan
maskinen används. De hjälper dig att förstå hur produkten fungerar och att
undvika onödiga risker. Förvara bruksanvisningen på en säker plats för
framtida bruk.
Innehåll
1. Maskindata
2. Säkerhetsanvisningar
3. Montering
4. Användning
5. Service & underhåll
1. MASKINDATA
Förpackningens innehåll
1
Detaljslip
1
Sandpapper (kornstorlek 80)
1
Adapter för dammutsugning
1
Bruksanvisning
1
Säkerhetsanvisningar
Inledning
Detaljslipen är utformad att torrslipa ytor av trä, plast och spackel samt målade ytor. Den
är speciellt lämplig för profiler, hörn och svåråtkomliga ställen.
Teknisk specifikation
Egenskaper
Fig. 1
1. På/av-knapp
2. Handtag
Spänning
230 V~
Frekvens
50 Hz
Ineffekt
180 W
Verktygsklass
II
Obelastad hastighet
13000/min
Slipplatta
145x145x88mm
Vikt
1.2 kg
Lpa (ljudtrycksnivå)
74.8 dB(A)
Lwa (ljudstyrkenivå)
85.8 dB(A)
Vibration
1.13m/s
2
User tips
•
Apply long uniform movements to your sander to obtain the best possible results.
•
The surface quality after sanding is determined by the selected grain.
5. SERVICE & MAINTENANCE
The machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
Cleaning
Clean the housing regularly with a soft cloth, preferably every time it is used. Keep the
ventilating apertures free from dust and dirt. Remove stubborn dirt with a soft rag
moistened in soapy water. Do not use any solvents such as petrol, alcohol, ammonia, etc.
as such substances can damage the plastic parts.
Lubrication
The appliance does not need any extra lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact your reseller. On the
separately enclosed spare parts list you can find an overview of the parts that can be
ordered.
Troubleshooting
Environment
To prevent damage during transport, the appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore please make use of options for recycling
the packaging.
Faulty and/or discarded electrical or electronic apparatus have to be collected
at the appropriate recycling locations.
Warranty
Warranty conditions and product liability apply according to national legislation.
• The electromotor gets hot
• The abrasive paper is filled with
adhesive/paint or a similar material
• Clean the ventilating apertures
• Paint or adhesive is not really dry.
• Some paints stick more to the
abrasive paper than others / clean the
abrasive paper at regular intervals
S
GB
