SERV-WARE DD24-1-HC, Руководство по обслуживанию, установке и уходу

Страница: 14 / 24

www.servware.com
800•768•5953
Service, Installation & Care Manual
MAINTENANCE
ONE DOOR CO
2
KNOCK-OUT:
This instruction is the procedure for installing a remote CO
2
container for one door unit.
INSTALL DRAFT ARM AND PARTS LIST
13
STEP 1 - Remove black knockout plug with a pair of pliers.
NOTE: Knockout plug for CO
2
line can be locate in two different areas.
View diagram to locate these two areas.
STEP 2 - Use drill and bit to bore hole straight back through wall into compressor compartment.
STEP 3 - Snake CO
2
line through hole down and around exiting behind rear castor underneath
rear grill.
STEP 4 - Seal hole around CO
2
line with silicone sealer to prevent cold air leakage.
Do Not lay CO
2
cylinders flat. Do Not drop CO
2
cylinders.
CAUTION!