3
3
Power Consumption
Model Feature
Brightness
Current draw (idle)
Model: Seriline AB Cidron
LED-Bar
Backlight
12VDC
24VDC
SC93100-MDEB
STD 13.56MHz/125KHz/2.4GHz with keypad
Low
Low
90 mA
47 mA
Medium
Low
90 mA
47 mA
SC93110-MDEB
STD 13.56MHz/125KHz/2.4GHz without
keypad
Low
Low
90 mA
47 mA
Medium
Low
90 mA
47 mA
SC93200-MDB
SLIM 13.56MHz/2.4GHz with keypad
Low
Low
34 mA
18 mA
Medium
Low
34 mA
18 mA
SC93210-MDB
SLIM 13.56MHz/2.4GHz without keypad
Low
Low
34 mA
18 mA
Medium
Low
34 mA
18 mA
The above values are excluding heater consumption which is variable and depending on
configuration settings. Default value is 220 mA at 12VDC but can be configured in 20 mA
intervals from minimum 120 mA to maximum 300 mA. When the heater is set in automatic
mode, the heater will be activated when the internal temperature of the reader is below +1°C,
the heater will automatically deactivate when the internal temperature e5°C.
Depending on the heater consumption setting the time it will take for the reader to 5°C
will vary- a higher power consumption setting will reduce the time required to heat the reader.
Current draw (idle) is defined as reader connected to power, no LED’s lit, buzzer is not
sounding and no reading of credential or key pressing is processed by the reader. Current
draw (peak) is defined as reader powered with both backlight and LED frame lit (Yellow),
buzzer is sounding and reader is reading a credential while simultaneously a key pressing is
processed.
