Doc Rev 20190913-A
Copyright 2019 Serialio.com
Use command “set ua b <rate>” to change baudrate e.g. “set ua b 9600” then tap SEND, M6A should
reply with success.
After baudrate set, type the command “save”, tap SEND, then power cycle the unit to use the new
baudrate.
To change the 8 character wireless discovery name of the BlueSnap use the command 'set sy d n
<name>’, and tap Send, verify success reply.
To use discovery name that has 3-character value, and maintain the last 4 digits in the Bluetooth MAC
address, use the command 'set sy d n <val>-####' e.g. 'set sy d n DB9-####’, then send command Save,
and power cycle.
Battery version of the M6A will power off, after a few minutes with no wireless connection to a host.
To set the time for this power off feature, use command ‘set sy a t <seconds>’
For example to have device power off after 5 minutes of no connection, use the command ‘set sy a t
3000’. To disable this power off timeout, set the seconds value to 0.
