BlueSnap
Commands Version 4.81SIO, 1/20/2016 Page 8 of
27
Cedar Park, TX, USA
•
(512) 994-3630
•
www.serialio.com
SF,1
Set Factory Defaults.
SI, <hex word> -
Inquiry Scan Window. Sets amount of time device spends enabling inquiry scan
(discoverability) . Minimum value is 0x0012, corresponding to about 1% duty cycle.
Inquiry interval is fixed at 0x1000, so time spent in inquiry is 0x12/0x1000 by default.
Maximum value is 0x1000, set to 0x0000 to disable inquiry scan and make device non-
discoverable. Default value is 0x0200.
SJ, <hex word> -
Page Scan Window. Sets amount of time device spends enabling page scan
(connectability) . Minimum value is 0x0012, corresponding to about 1% duty cycle.
Page Scan interval is fixed at 0x1000, so time spent in page scan mode is 0x12/0x1000 by
default. Maximum value is 0x1000, set to 0x0000 to disable page scan and make device
non-connectable. Default value is 0x0200.
SL,<E,O,N>
Parity. Can be any of, Even, Odd, or None. Only the first character is needed
Example :
“SL,E”
sets the parity to Even
.
SM,<3,2,1,0>
Mode (0=slave, 1=master,2=trigger, 3=auto)
Example :
“SM,1”
sets the mode to Master
SN,<name>
Friendly Name of the device, 16 characters maximum.
Example :
“SN,MyDevice”
S-,<Name>
This command automatically sets the Bluetooth Friendly Name to “Name-EC42”
where “EC42” is the last 4 digits of the Bluetooth address.
SO,<text>
Extended Status String, 8 character maximum. Setting this string to from 1 to 8
characters will enable status messages to be sent to the local serial port. Two status
messages are sent, when a Bluetooth connection is established, the string
”<text>CONNECT” will be sent. Upon a Disconnect, the string <text>DISCONNECT
will be sent. This parameter is useful, for example, when connected to a printer, the
printer can examine an escape sequence, if the <text> is set to ESC%, the printer can parse
the ESC%CONNECT and ESC%DISCONNECT messages without interfering with
normal print jobs. In Trigger or Master modes, the first character of this string is used as
the BREAK connection character.
Example :
“SO,ESC%”
SP,<text>
Security Pin Code, 16 character maximum
Example :
“SP,secretcode”
SR,<adr>
Remote Address. 12 hex digits, (6 bytes) no spaces or chars between.
Example :
“SR,00A053112233”
