Serial 1 MOSH/CTY, Руководство пользователя

Страница: 20 / 92

16
CHARGING THE BATTERY
WARNING
Only use the provided charger to
charge the battery. The charger is
specifically designed to work with this
battery and terminals. The use of any
other charger can cause damage to the
battery and/or injury to the user.
Your eBicycle will be delivered to you with
the battery installed, with a State of Charge
(SOC) less than 30%. It is recommended
that you charge your new eBicycle battery
fully after initial assembly and before every
future ride.
The battery may be charged in or out of the
eBicycle. Battery status indicator lights will
indicate battery level while charging.
Disconnect charger when status lights
indicate battery is fully charged.
Always unplug a battery after it has
completed its charging cycle.
Installed in eBicycle
1. Locate the charging port on the lower
left-hand side of the motor cover.
2. Open the cover on the charging port.
Be careful not to tear or pull off the
cover.
3. Plug the charger into a wall outlet.
4. Check that the charger plug and the
port are free from dirt and debris.
Insert the charger plug into the
charging port.
5. The LED indicator on the battery
charger will turn solid green when the
battery is fully charged. Once fully
charged, disconnect the charger from
the battery and the outlet.
6. Ensure that you securely close the
charge port cover.
EN