Serfas DASH 350W, Руководство пользователя

Страница: 13 / 23

ERROR CODES AND TROUBLESHOOTING
CODE ERROR HOW TO RESOLVE
21
Current
Error
Check the cable that connects the
rear hub motor to the rest of the
system. Make sure it is free from grit or
contaminants and is firmly connected.
22
Throttle
Error
When you press and release the throttle,
it should return to the original position.
Remove any obstructions. Check the
throttle and throttle cable for damage,
such as a cut or frayed cable.
23
Motor Phase
Error
Check the cable that connects the rear
hub motor to the rest of the system
and make sure it is free from grit or
contaminants and is firmly connected.
This error might appear if you don’t
reconnect the cable after removing the
rear wheel (for example, after changing
a flat tire, or transporting your bike in the
trunk of a car). At least one of the motor
phase wires has been damaged or is
temporarily disconnected.
24
Motor Hall Sensor
Error
The hall sensor inside the rear hub might
be disconnected or damaged. Service or
replace the rear hub.
10 SERFAS E-BIKE OWNER’S MANUAL
In the event of a problem with the electrical components of your
bike, the display will show an error code. Compare the code with
this list below and HOW TO RESOLVE: