Serfas DART 350W Step-Over, Руководство пользователя

Страница: 7 / 23

4
USING THE CONTROLS
START UP: To turn on your bike, push the power switch on the battery
(Fig. 1)
, then press and hold the “M” button for 3 seconds
(Fig. 2)
.
To turn off, press and hold the “M” button for 3 seconds
(Fig. 2)
, then
press and hold the power button on the battery for 2 seconds. The
display and battery have an energy-saving feature, if there is no
activity for 10 minutes, they will turn off automatically to preserve
battery life.
Push the “U” or “D” arrows to change the level of pedal assist
(Fig. 2)
.
Hold “U” and “M” for 3 seconds to switch between showing real-time
speed, average speed, and max speed
(Fig. 2)
.
Push “M” to toggle between the display of the Odometer, Trip
Distance, Voltage, and Elapsed Time.
BACKLIGHT: Press and hold “U” for 3 seconds to enable the
backlight on the display. Press and hold “U” again for 4 seconds
to turn it off
(Fig. 2)
.
WALK MODE: To enable walk mode, first come to a complete stop
and stand next to the bike. Press and hold “D” for 3 seconds. The bike
will slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
“D” button. This feature is useful for pushing the bike up a hill or
walking through a crowd, where you cannot safely ride.
“Super walk mode” is an even-faster version of walk mode. To use it,
hold the down arrow to engage standard walk mode, then press the
throttle. This is useful on very steep climbs or when towing a trailer.
Use caution with both walk modes.
SERFAS EBIKE OWNER’S MANUAL