Serfas DART 350W Step-Over, Руководство пользователя

Страница: 14 / 23

25
Brake
Error
The
D art
500
W
uses special brake levers
that stop the motor when you apply the
brakes - built in “magnetic reed switches”
disengage the motor’s power when the
lever is squeezed. If the lever is damaged
(for example, following a crash), it might
need to be replaced.
26
Overheat
Error
The controller or motor has overheated
from extended periods of extremely
heavy use (for example, climbing a steep
hill with maximum pedal assist applied.)
Turn off the bike, allow the components
to cool off, then try again.
28
Low
Voltage
The voltage supplied by the battery is
too low to operate the bike. Charge the
battery and try again. If the issue persists,
check the voltage output on the battery
terminals using a volt meter.
29
Over
Voltage
The battery is supplying too much
voltage to the controller. Make sure you
are using the correct battery for your
bike. For example, the 36V
D art 350 W
battery will not work with the 48V D art
500W , triggering the error.
30
Communication
Error
Poor connection between the controller
and the display, check all cable
connections.
11 SERFAS EBIKE OWNER’S MANUAL