5
Adjusting the flow of the water
The flow of the water can be adjusted by turning the dial on the water pump.
Care and maintenance
•
Keep water clean and free from debris. If debris gets caught in the pump, disconnect it
from any power sources and rinse the pump under clean running water.
•
Clean the water feature periodically to prevent build-up of mineral deposits on the sides
and base. Use a stiff brush and clean warm water with a little liquid soap. Do not use
detergents or abrasives as this will damage the surface of your water feature.
•
Frost can cause damage to the pump. The pump must be removed and stored in a frost-
free environment if the water is likely to freeze.
Connect the plug from the
transformer to your mains outlet
Water flow adjuster