3
Locating the water feature
•
Position the base on a suitable firm, level surface away from areas where it is likely to
become clogged with leaves or debris, which could damage the pump.
•
Unpack the components and lay out on a flat surface.
•
Check there is enough cable to reach the plug socket.
•
Ensure the feature is only placed on surfaces that will not get marked or damaged by
water splashing. If placing on wooden decking, ensure that the base surface has been
sealed or treated as appropriate. Place in a location where any water spills or splashing
will not reach any other electrical equipment or cause damage.
Assembly
Reach inside the opening in the rear or
side of the water feature, pulling out
the tubing/water pipe and internal
LED cable(s), (if the water feature is
supplied with lights
–
not available on
all models)
Connect the tubing to the outlet of
the pump and place it in the water
reservoir through the opening in the
rear or top of the water feature; secure
to the base of the reservoir using the
suckers to prevent the pump from
moving around