3
Parts list
Assembly
1.
Attach the low basin (6) to the planks (5), one by one using the small screws (9) then
attach to the upper basin (4) with the rest of the small screws.
2.
Put the pump and pipe (7) into the upper basin and attach the board (3) with the basin
by using the large screws (8) taking care to make sure that the cable comes through the
hole.
3.
Connect the pipe to the antique pitcher pump (2) then attach the pitcher pump to the
board with the large screws. Connect the pipe and the pump.
4.
Attach the handle (1) to the pitcher pump using a large screw.
5.
Fill the upper basin ¾ full of water and ensure that the water covers the pump.
Note:
The cable is waterproof and can be submerged in water.
6.
Plug the socket into the power outlet.
7.
Once the water starts flowing, add more water to the large barrel as needed to ensure
that the pump remains submerged.
8.
If you would like to adjust the flow of the water, slide the flow adjusting dial on the
water pump.
