Sereniti SHS-2000, Руководство пользователя

Страница: 120 / 202

S H A R E D S E R V E R D R I V E S A N D N E T W O R K D E V I C E S
External Storage Devices
102 | User Manual (v1.0.0.1)
8
V I E W T H E C O N T E N T S O F T H E D E V I C E U S I N G T H E
C O M M A N D C E N T E R
To use the Command Center to view the files and folders stored on the
device, follow the steps below:
1
Log into the Command Center.
2
Click Sharing and then click the Setup External Hard Drive icon to
display the Attached USB Devices page (
FIGURE 8-1
).
3
Click VIEW . The files and folders in the drive are shown in an Internet
Explorer window.
V I E W T H E C O N T E N T S O F T H E D E V I C E U S I N G T H E
W I N D O W S E X P L O R E R O R I N T E R N E T E X P L O R E R
To use the Windows Explorer or Internet Explorer to view the files and
folders stored on the device, follow the steps below:
1
Log into the PC.
2
Open the Windows Explorer or Internet Explorer.
3
In the Address field, type:
\\SERENITISHS\< device name >
where
< device name >
is the name of the hard disk.
4
Click Go . The files and folders in the drive are shown in the Explorer
window.
R E P A I R A H A R D D R I V E
To repair a hard drive without causing loss of data, follow the steps
below.
1
Log into the Command Center.
2
Click Sharing and then click the Setup External Hard Drive icon to
display the Attached USB Devices page (
FIGURE 8-1
).
3
Click REPAIR . A message pops up and prompts you to confirm the
repair operation.
4
Click OK to proceed or CANCEL to terminate.