Figure 1
Figure 3
Figure 2
www.SereneLifeHome.com
6
•
In order to avoid injury or property damage, unplug the power
cord when not using the product.
•
If leakage occurs and the liquid splashes into the eyes
accidentally, do not rub your eyes but rinse your eyes with clean
water immediately instead. If the symptom is serious, please
consult your doctor.
•
Before using, please check the cigarette lighter socket to make
sure that there is no rust or residue inside. The cigarette lighter
socket with poor electric conduction may cause overheating of
the product or power source, which will damage the product.
•
The purpose of using this product is limited to the description
in the User Manual.
V. USB CHARGING OUTPUT OPERATION
In stand-by or power-on state, connect one end of the data cable
to the mobile phone, and the other end to the USB 1A or 2A
output port of this product to charge the digital product, as
shown in Figure 1.
VI. CHARGING USING THE CIGARETTE LIGHTER PLUG/ADAPTER
In the stand-by or power-on state, take out the cigarette lighter
plug and insert it into the DC12V cigarette lighter socket of the
car or ship to charge or power the product, as shown in Figures 2
and 3.
VII. INFLATION OPERATION
•
Press and hold the switch for 3 seconds to enter standby state.
•
Connect the end with flexible conduit adaptor
（
5
）
of the hose
with the air pump inflation inlet (5), and twist clockwise to
tighten it, as Figure 5.
•
Connect the other end of the hose with the air nozzle that
matches the air bag, and insert the inflation valve of the air bag.
Turn it clockwise to fix it as shown in Figure 6.
•
Press the pressure unit switching button and select the
unit you need.
•
Press the pressure increase button or pressure reduction
button to set the desired pressure value. The pressure
range is from 0 to 16 PSI (1 PSI = 0.0689 bar = 6.89KPA).
Upon the completion of the above steps, press the power
on/off
button to start inflation.
•
In the process of inflation, you can press the pressure increase
button or the pressure reduction button to increase
or decrease the pressure value.
www.SereneLifeHome.com
7
