www.SereneLifeHome.com
6
4.
Spread the clamps along the bottom of the garment so that it is evenly weighed
down and will not go out of shape when the nylon balloon is inflated.
5.
Plug the unit into an electrical outlet.
6.
Turn the timer knob (6) clockwise and set it to the length of time you want.
7.
Once the nylon balloon has infl ated, straighten out the garment and smooth it
down.
8.
When the set time is completed, the device switches off automatically.
The drying /pressing process can be interrupted at any time by turning the
timer knob (6) to the starting position.
9.
Remove the garment from the nylon balloon and hanger (1).
10.
Unplug the unit from the electrical outlet and allow the device to cool down
completely.
Tips
• The device is intended primarily for machine-spun laundry! If handwashed or
nonmachine-spun laundry is to be pressed, first allow it to dry out a little first.
• The drying / pressing process takes around 10 minutes for a spun-dried shirt.
However, the length of time can vary depending on the material and thickness
of the material. We recommend that you start with a shorter time and extend it if
necessary.
• The nylon balloon can be enlarged or reduced in size with the aid of the zip
fasteners. For smaller sizes, the zip fasteners should be closed. For larger sizes,
the zip fasteners should be opened on both sides.
• Wide-spaced buttons may result in the button strip crimping slightly during
pressing. This area will need to be smoothed down by hand immediately after
the pressing process.
3.
Pull the garment which is to be pressed over the
nylon balloon and the hanger (1) and button up
the buttons if necessary.
Make sure that:
• the collar is fitted over the collar section
•
the arms of the nylon balloon fit properly in the
sleeves of the garment and are not twisted or
scrunched up,
•
all buttons on the garment (including on the
sleeves) are button up.
Содержание SLIRX45
Страница 10: ......
