www.SereneLifeHome.com
Note:
•
•
•
OPERATION
Back wall
lef
t w
all
righ
t w
all
G
200mm
H
200mm
I
200mm
Fig.1
Strainer
Sealing ring
Water Inlet
Pipe Connector
Fig.3
Strainer
Fig.2
Before connecting your pipe connector
(plastic one is recommended) to the ½ inch water
inlet (1/4-20 British thread), make sure there is a
sealing ring in the pipe connector.
If not, the attached sealing ring must be placed to
ensure perfect sealing.
After connecting water supply, flush the toilet
several times to check leaks.
Fig. 4
Fig. 5
1. Add water to bowl
To add water to the toilet, press the flush pedal part way down.
Water flows into the bowl while flush valve remains closed.
If the flush valve moves, let up on the pedal slightly.
Adding water to an empty bowl helps prevent holding tank odors
from entering the living space. Adding water is recommended
prior to flushing solids and toilet paper. (Fig.4)
2. Flush toilet
To flush, press pedal down until it contacts the floor.
Release pedal after complete flush. (Fig.5) When flushing liquids,
press the pedal for 1-2 seconds. When flushing solids, press pedal
until contents are rinsed from bowl.
Flushing longer than necessary will cause holding tank to fill too
quickly. A small amount of water will collect in the bowl after a
flush t create an airtight seal.
