Serene Sirio S2028, Руководство по эксплуатации и установке

Страница: 9 / 13

Special functions cont:
Temperature control:
•
The temperature values for the Comfort-1, Comfort-2, Eco and Antifreeze modes are automatically
calculated and cannot be directly modified by the user. The reference temperature is always
indicated on the display together with the symbol representing the selected operating mode.
•
NOTE: The temperature measured by the sensor inside the product always indicates the ambient
temperature in the immediate vicinity of the product and may differ from the temperature
measured with other instruments in other areas of the room. This difference may depend on
various factors, such as:
- The installation position: some areas of the room may be affected by currents or warm air pockets
that can change the sensor measurement;
- The installation on an external perimeter wall, which is normally colder than internal walls, may
result in a lower temperature measurement than the actual room temperature;
- Unstable conditions: each evaluation must be made under stable operating conditions. For this
reason the Comfort temperature should not be changed before 60 minutes have elapsed since the
previous modification.
- In fact, it is not possible to assess whether the room temperature is correctly maintained by the
product if the temperature level is continuously modified in a short period of time.
•
NOTE If the difference between the set temperature and the ambient temperature is detected in
stability conditions, calculate this difference and then increase or decrease the comfort temperature
level on the product of the exact calculated difference value.
Sirio 8