Serene Sirio S2028, Руководство по эксплуатации и установке

Страница: 3 / 13

•
Before operating the convector, please read these instructions thoroughly to avoid damage
and hazardous situations. Any use of this convector other than that stipulated in this
instruction manual may cause fire, electric shock or injury, and voids all warranties.
•
Warranty does not apply to any defect, deterioration, loss, injury or damage caused by, or as a result of,
the misuse or abuse of this heater. None of the terms of this warranty are to be taken as excluding any
conditions or warranties implied by State law.
•
Before any operation remove the packaging and check product integrity. In case of defects or damages
do not try to repair it yourself but contact your dealer.
•
Do not let children play with the packaging and protect the environment by disposing of the packaging in
accordance with the national regulations for waste processing.
Wall mounting:
Fix the convector in horizontal position with the air outlet grill upward;
•
This convector is fitted with a double electrical insulation circuit (class II) and therefore does
not require earth connection.
•
In wet spaces like bathrooms or kitchens, the connection terminal must be installed at least 25
cm above the floor. figure 1 below
•
The electrical connection to the power supply must also be fitted with a two-pole switch with a
minimum gap between the contacts that allows complete disconnection according to excess
voltage III category conditions.
•
The device must be wall-mounted respecting the minimum distances from ceiling, floor and side
walls shown in figure 2 below.
•
The support bracket must be fixed to the wall respecting the distances indicated in figure 3
below
•
Always observe the minimum distances from walls, furniture and/or objects, as indicated
in picture 3.
To proceed with the installation:
-- Remove the bracket from the product;
-- Drill 4 holes in the wall respecting the distances indicated in figure 3 below
Sirio 2
Instructions-Advise: