Serene S2066
3
Bathroom Fan Heater
To attach the heater to the wall:
1.
Remove the wall mounting base from the heater by using a screwdriver (large flat blade) to release
both of the side clips from inside the base.
2.
Secure the mounting base to the wall using the four fixing screw holes provided. The base supplied
with the heater must be used when attaching the heater to the wall.
3.
Put the heater onto the mounting base and snap it into position.
4.
Connect the flexible cord to the mains power supply. A suitable disconnect device is required to be
incorporated in the fixed supply wiring.
Operation
The operation of the heater is controlled by use of the pull-cord switch. Pull the pull-cord to switch the
heater on. Pull the pull-cord again to switch the heater off. The blue LED indicator lights when the heater
is operating.
The heat output is regulated by an internal step-down thermostat, which will reduce the output from
2200-2400 Watts to 1100-1200 Watts, when a comfortable room temperature is reached.
Care
The heater requires regular cleaning to ensure trouble free operation.
•
Isolate the heater from the mains power supply.
•
Use a damp cloth to clean the exterior of the heater. Do not use any abrasive cleaners.
•
The S2066 is fitted with our new “Airslip” metal fan blade that alleviates any dust build up inside
the heater. Use a vacuum cleaner to remove dust and fluff visible on the heater inlet and outlet
grilles.
•
Ensure the heater is dry before turning the mains power supply to the heater back on.
