To set the thermostat:
•
Turn the thermostat knob clockwise to maximum and wait until a comfortable
ambient temperature is reached.
•
Turn the thermostat knob anti-
clockwise until you hear a ‘click’ and the heater
turns off.
•
Fine adjustments can then be made as needed.
Safety Cutout:
Your Serene S2059 Wall Fan Heater is fitted with an auto-reset thermal cutout and a
fusible link. Either of these devices will automatically switch off the elements and the
motor, should the unit reach an abnormal temperature.
Should this occur, disconnect the heater from power supply, check for blockage of the air
inlet and outlet, and use a vacuum cleaner to clean if necessary.
If the heater still fails to operate, contact your supplier after first checking that there is
power to the unit and that the thermostat is not set to maximum or minimum..
Specifications: Serene S2059:
Electrical
Supply
230-240 volts A.C. 50 Hz
Wattage
2200-2400W, thermostatically controlled.
Wiring
Permanent connection. Earth required.
Ingress Protection Rating IP20
Dimensions
Height 435 mm
Width Front panel 380 mm
Width back 345 mm
Depth main unit 88 mm
Depth front panel 28 mm - including knobs extended
Weight
4.8kg
Serene Industries Limited reserves the right to alter both design and specifications without notice.
Serene offers a full replacement warranty.
We do NOT supply any spare parts
or include any service guarantee.
Operation (cont):
435mm
380mm
345mm