3.Automatic Mode
The product is set to work at a comfort temperature whenever someone is detected in the
room.
Should no one be detected in the room for at least
TEN minutes,
the heater will
automatically set the Eco mode (3,5°C less than the set Comfort temperature). Should no one
be detected in the room for more than 36 hours, the heater will automatically set the Anti-
freeze mode (7°C).
In case someone should be detected again for at least 2 minutes, the product will
automatically increase the temperature to the comfort level.
4.
Basic Mode
Tesoro works in Comfort mode.
The presence detection is
disabled
and doesn't affect the set temperature as in Automatic
mode.
In Automatic mode is also available a special feature, which is activated at user’s choice,
which allows to detect the possible opening of a window and to switch to Anti-freeze mode
to minimize energy waste.
Using the fan heater
MAIN ON/OFF SWITCH
(placed on the left side of the product)
The power supply of the product is controlled by an electromechanical ON/OFF switch.
Switching off the fan heater will cut off the power to the electronic board causing - after 30
minutes of power supply absence - the loss of every stored information. We recommend to
use this switch only when you are not using the product for long periods. Instead, it is
possible to use the on/stand-by key for any short-term interruption, so that no stored setting
will get lost.
At first use of the product or in case of over 30 minutes power loss, when the product turns
on the display shows 00:00
and begins counting the time starting from this value.
Should no adjustment be made within 15min after power up, the product will automatically
switch to Antifreeze
mode with the lighting up of the corresponding LED light
- ON/OFF
8
