Before operating the heater, please read these instructions thoroughly
to avoid damage and hazardous situations.
Any use of this heater other than that stipulated in this instruction
manual may cause fire, electric shock
or injury, and voids all warranties.
Before any operation remove the packaging and check product integrity.
In case of defects or damages do not try to
repair it yourself but contact your dealer.
WALL MOUNTING
Only fix the heater in vertical position with the air outlet grid downward;
• The heater is fitted with a double electrical insulation circuit (class II) and
therefore does not require an earth connection.
The heater must be correctly installed in compliance with the regulations in force
in the country of installation.
In wet spaces like bathrooms or kitchens, the connection terminal must be installed
at least 25 cm above the floor.
• To choose the best installation position please consider that the sensor is able to
detect movements. Place the heater in the best position to detect people inside the
room.
•. Never install the product so that the distance between the floor and the lower
side of the product is less than 600 mm. See picture
3 below
•
Drill three 6 mm diameter holes in the wall, as shown in picture
4 below
•
Insert the three wall plugs supplied with the product
•
Insert the 2 upper screws, contained in the same bag, taking care to
leave a
distance of 8 mm between the head of the screws and the wall.
•
Grip the heater firmly and hook it onto the two screws;
CAUTION!
Before
releasing the heater make sure it is attached to the 2 screws.
•
Then secure the product with the lower screw.
3
