Power Supply
RCx-Txm is powered by an AC adapter with battery backup.
The battery has been pre-installed. Pull out and remove the battery tab to engage the
battery. If the battery needs to be replaced, remove the security screw and open the
battery compartment door.
Normal battery usage will last about 6-12 months. If the power indicator light is dim or does
not come on when the remote button is pressed, check the AC adapter, and replace the
battery.
Pairing RCx-Txm with RCx-1000
1. With RCx-1000 idle, press and hold the FLASH button until a long “beep” sound is
heard and the indicator next to the button is flashing.
2. Press and hold the remote control button until a “beep” sound is heard from both the
RCx-Txm and RCx-1000. Pairing is complete.
Note: The pairing period is available for 20 seconds only.
Remote Control RCx-1000
Press button once to make RCx-1000 answer a call or end a call;
According to the working state of RCx-1000, RCx-Txm can remote control RCx-1000 to
make calls, redial number or make flash function through press the button of RCx-Txm.
