Cleaning/Maintenance 7
Operation 6
Troubleshooting 8
Operation 5
How it Works 3
Operation 4
CAUTION: Keep away from children and pets. Do not use on wooden
or painted surfaces that can be damaged by essential oil. Keep the
unit upright at all times. Do not tilt unit at any time as water may spill and
damage furnishings and fabrics.
Using incorrect water, distilled or purified
Unit needs to be cleaned. Oils are
clinging to ceramic disc or sensor
Clean unit as advised in
instructions with clean water
& clean ceramic disc/sensor
with brush or swab.
Use Tap Water (without filter)
Water level is higher than max level line
.
Clean unit and add water
1/2 way to fill line and
additional water after getting
mist.
Water level indicator is dirty
Blinking Lights
Unit will not stop
running even
though empty
No misting and
unit is spraying
water
Water level indicator is dirty
Water is too cold
Change to warmer water.
Make sure all 3 parts are
assembled on top of unit.
Unit is out of water
Add additional water
Clean unit as advised. Pay
particular attention to swab
the sensor/disc inside the
bottom of unit.
Clean unit as advised. Pay
particular attention to swab
the sensor/disc inside the
bottom of unit.
Make sure the cover is
aligned properly.
Cleaning:
• Rinse with warm water and clean as follows:
i. Wipe with soft damp cloth to clean.
ii. Wipe with soft cloth and rubbing alcohol when
needed to break up excessive oil residue.
iii.Use a cotton swab and water or rubbing alcohol
to clean the ceramic disc inside the base.
*See diagram to the left.
• We recommend cleaning the unit every time you
change oils or every 2 uses.
• Do not use detergents or abrasive agents
to clean the diffuser unit.
Do not return this diffuser to the retailer.
Please contact the manufacturer's customer
service for assistance. 1-888-548-0040
1
4
5
2
To control mist:
1st press will turn on
continuous misting.
2nd press will turn on
30-minute alternating
mode.
3rd press will turn off
30-minute alternating
mode.
4th press will turn off
the unit.
To activate timer:
1st press will set 2-hour
timer (automatic shutoff
after 2 hours)
2nd press will set 4-hour
timer (automatic shutoff
after 4 hours)
3rd press will set 6-hour
timer (automatic shutoff
after 3 hours)
4th press will cancel
timer setting
3
#1
#2
Using a cup, fill with
lukewarm tap water
up to the max fill line.
Do not use cold
water.
Do not fill above
max fill line.
Add up to 5-10 drops
of your essential oil.
#1: First, plug the
power to the unit.
Then, connect to
a wall outlet.
#2: Lower the vapor
insert and cover
onto the base.
CAUTION:
•DO NOT FILL BASE UNDER RUNNING WATER.
•DO NOT USE PURIFIED OR DISTILLED WATER.
•DO NOT MOVE ONCE UNIT HAS BEEN FILLED
WITH WATER.
Mist Disc
& Sensor
To control lights press the
light icon.
1st press to turn on warm
white light.
2nd press for color rotating
lights.
3rd press to select
displayed color.
4th press to turn lights off.
Using a cotton swab
and warm water,
gently clean the mist
disc and sensor
located inside at the
bottom of the base.
Morocco Metal Diffuser uses high
frequency Ultrasonic technology that
vibrates cool water inside the unit into an
ultra fine mist. When essential oils are
added, they are immediately dispersed
into the air, providing immediate healthful
benefits while helping to ionize the air. It
can be used in a bedroom, living room,
office area or anywhere you want to
create a relaxing, healthful, environment.
