SERENE LIFE SLSFE342, Руководство пользователя

Страница: 4 / 6

4
SETTING THE USER CODE
OPENING THE SAFE WITH THE EMERGENCY KEY
AUTOMATIC LOCK
• With the door open, press the reset button one, start setting code when the yellow
lights goes on.
• Input new code (3-8 digits), and press the “A” or “B”(“C” or “E”) button to confirm with 2
buzzer beeps, which indicates the acceptance and storage of the new code. The yellow
light flashes with 3 buzzer beeps, which means the code changing is not effective, and
you need to try again.
Upon first receipt of the safe, or either the electronic circuit malfunction or codes unknown.
You could also use the emergency key to open the safe.
• Remove the cover of the emergency lock.
• Insert the emergency key, turn it count clockwise, then turn the knob (or master key)
clockwise to open the door.
• 3 continuously wrong entries will activate the warning beep for 20 seconds.
• Another 3 continuously wrong entries will active the warning beep for 5 minutes.
!
NOTE: The key pad would be disabled during the beeping. You can only stop the beeps
by opening the safe with emergency key and power-cut by removing the battery.