For "Join" a network, please do the following instruction:
•
Put the ZigBee Coordinator into “Permit-Joining” mode.
•
Press the Join/Leave button for less than 1 second. The LED is blinking while processing. If the
sensor has been joined with the ZigBee Coordinator successfully, the Green LED will be on for 2
seconds and then off. The Green LED will be off instantly if failed.
•
Leave
Function
For "Leave" a network, please do the following instruction:
•
Press Join/Leave button for 3 seconds to let the sensor disassociate from the ZigBee Coordinator.
If the sensor has been disassociated successfully with the ZigBee Coordinator, the Green LED
will be on for 1 second and then off.
•
The LED will stay off during the normal operation.
•
The sensor is equipped with a tamper switch. If the cover of sensor is removed, the sensor will send
an alarm to the ZigBee Coordinator. The sensor will be in "Awake" mode before replacing the cover.
SZ-DWS01 v1.0
3
01/11/12