Data Pro
P/N 10029355 Rev AE
Operation Manual
Page 8 of 92
2.0 Connecting Power
!! WARNINGS !!
HIGH VOLTAGES MAY BE PRESENT INSIDE THE ENCLOSURE. DISCONNECT ALL AC
POWER FROM SOURCE BEFORE ATTEMPTING TO WIRE THE DATA PRO.
ANY WIRING TO THE INTERIOR OF THE DATA PRO MUST BE PERFORMED BY
QUALIFIED PERSONNEL AS LETHAL AC VOLTAGES MAY BE PRESENT WHEN
CONFIGURED TO OPERATE FROM A CURRENT PROTECTED AC PRIMARY POWER
SOURCE.
AFTER SERVICING, FRONT PANEL SCREWS MUST BE RE-TORQUED TO 10 IN*LBS TO
PREVENT ACCESS TO HIGH VOLTAGES THAT MAY BE PRESENT INSIDE THE UNIT.
THE FRONT PANEL SWITCH DOES NOT CONTROL AC MAIN POWER. MAKE THE
CONNECTIONS FIRST AND THEN CONNECT THE AC POWER SOURCE. THE AC
PRIMARY POWER SOURCE MUST BE OVER CURRENT PROTECTED TO 1A BY THE
USER FOR SAFETY.
NOTE:
Remove the internal anti-static packaging foam before operating the Data Pro.
The mechanical panel fasteners and screws are to be re-torqued after servicing to
prevent accidental access.
