Add plants
Install decoration
and technical equipment
Set up the bottom gravel
Place the aquarium correctly
Place the aquarium on a
stable support in a location
without direct sunlight. Put
#
thermo-safe between
the aquarium and the sup-
port. Clean the aquarium
with water with an
addition of 10 %
#
pH-minus.
Distribute
#
floredepot
with a layer thickness of max.
2 cm in the aquarium. Dis-
tribute the freshly washed
bottom gravel on top,
approx. 5 cm high.
Install the technical equip-
ment by
#
, but do not
put it in operation yet. Build
an underwater landscape
from carefully cleaned rocks
and roots.
1
Fill the tank with lukewarm
water by 2/3. Pour the
water onto a shallow dish as
to avoid the bottom gravel
being swirled up. Add
#
toxivec according to
the instructions for use.
Now put the technical
equipment into opera-
tion.
Shorten the plant roots by
approx. 3 cm. Press plant
holes into the ground
using your finger, put in
the plants and cover the
roots with bottom gravel.
Add
#
aqutan accord-
ing to the instructions for
use.
#
water test kits are an
“early warning system”
allowing you to detect devi-
ations from optimal water
values. You will find more
detailed information in the
test chart on page 11.
3
2
Fill in water
5
4
Test water
6
Setting up a
#
Biotope Aquarium in steps
7
8
