Confidential and Proprietary
Monarch Go-GPS-BLE Datasheet and Hardware Integration Guide, Rev 1
7/28
Notes:
(1) TIS/TRP performance is met when design recommendations are followed for optimal antenna
placement. These values are applicable to A3 hardware version.
(2) Additional charges might apply. Contact Verizon for service availability.
The
below
table
summarizes
the
product
reference
orderable
online
from
Avnet
https://www.avnet.com/shop/us/m/sequans-communications/
) or Sequans for direct customers:
User interface (1.8V)
UART 4-wires interface (RXD, TXD,
RTS, CTS) is the physical interface for
controlling Monarch Go-GPS BLE from
an external processor, typically a MCU,
with AT commands. The default
baudrate is 115200bps with hardware
flow control (RTS/CTS)
RING signals the availability of URC
from Monarch Go-GPS modem and can
be used to wake-up the MCU on the
host board
WAKE, POWER_STATUS: these
functions are disabled and not used.
Debug interface (1.8V, 3.1V)
UART2 2-wires interface (RXD/TXD)
with default baudrate of 115200bps for
LTE modem console port. Hardware
flow control RTS/CTS is disabled by
default. This interface is 1.8V.
GPS_UART1 2-wires (RXD/TXD) with
default baudrate of 115200bps
configured for GPS console port. There
is no signal for hardware flow control
RTS/CTS. This interface is 3.1V
Avnet orderable
reference
Sequans orderable
part number
Item description
Hardware
version
UE software
version
Product status
MONARCH-Go-GPS-
BLE-STK
GM01Q-Go-GPS-BLE-
A4
Monarch Go-GPS
BLE
Starter Kit
A3
SR1.2.0.0-10867
Volume
production
MONARCH-Go-GPS-BLE
GBA3NAZQZZ
Monarch Go-GPS
BLE modem
component with two
M.2 screws and nuts
A3
SR1.2.0.0-10867
Volume
production
Will be provided in a future edition of the document
150mm flex cable
n/a
Not applicable
Volume
production
