Sepura SC21 Series, Руководство пользователя, Страница: 60 / 166

Changing group scanning priority
1. Select Edit > Options > Change Priority .
2. Select scan priority (High), (Normal) or (Low) then press Select .
3. Select Edit > Options > Save .
Scanning ON/OFF
Scanning of talkgroups can be enabled and disabled. If scanning is disabled,
the radio will ignore incoming calls on these talkgroups. Your current
talkgroup is always scanned.
Note: Background talkgroups are always scanned and will continue to be
scanned when scanning is disabled.
1. Select Menu > Groups > Scanning ON/OFF .
2. Press Toggle (or the Select/Send key) to enable/disable scanning.
Folder Selection Mode
If you radio is customised for Folder Selection Mode , you will need to select a
folder, which is typically configured with zero or one selected TMO
talkgroup and/or one selected DMO talkgroup, which the radio uses to make
calls.
When a folder is selected and a talkgroup within that folder is selected as the
requested talkgroup, they appear on the Home screen. If a folder is not
selected when the radio powers on, the message '
No Folder ' appears on the
Home screen. When a folder is selected that does not have a selected
talkgroup, the message
'No Selected Group' appears.
Depending on the customisation of your radio, when you press the Groups
key from the Home screen, one of the following is activated:
Folder list . The current selected folder opens. You can change the
talkgroup within the selected folder or use the Back key to display the
Folder list (a list of selectable and non-selectable programmed into your
radio) and choose a new folder. The selected folder within the Folder list
and the selected talkgroup within a folder are indicated by the
icon.
52
SC21 Series – 07/2017