SEPTENTRIO PolaRxS, Руководство по оборудованию

Страница: 11 / 13

_______________________________________________________________________ 1 PolaRxS_PRO
PolaRxS Product Family Hardware Manual v1.3.0
11
5 Reserved
1.2.8 PWR
If you are using a different power adaptor than the one provided by Septentrio, make sure that it can
sustain a current of 1.5A.
1.3 Log Button
The log button is not functional on the PolaRxS: it has no effect.
1.4 Status LEDs
LED Name LED Behaviour
POWERLED LED lights when the receiver is switched on.
LANLINKLED LED blinks when sending or receiving data over Ethernet.
LOGLED
LED lights when data is being written to the internal SD memory card. If the
logging rate is larger than 1 Hz, LED lights continuously.
PVTLED LED lights when a PVT solution is available.
GPLED General-purpose LED. The function of this LED is configured with the
setLEDMode
command. By default, this LED has the DIFFCORLED
function (see below).
DIFFCORLED Differential correction indicator. In rover PVT mode, this LED reports the
number of satellites for which differential corrections have been provided in the
last received differential correction message (RTCM or CMR).
LED behaviour Number of satellites with corrections
LED is off No differential correction message received
blinks fast and
continuously (10 times per
second) 0
blinks once, then pauses 1, 2
blinks twice, then pauses 3, 4
blinks 3 times, then
pauses 5, 6
blinks 4 times, then
pauses 7, 8
blinks 5 times, then
pauses 9 or more
The LED is solid ’ON’ when the receiver is outputting differential corrections
as a static base station.
TRACKLED
LED behaviour Number of satellites in tracking
blinks fast and
continuously (10 times per
second) 0
blinks once, then pauses 1, 2
blinks twice, then pauses 3, 4
blinks 3 times, then
pauses 5, 6
blinks 4 times, then 7, 8
Pin # Description
1 Power: 9 to 30V DC
2 ON/OFF. When this pin is tied to pin#1, the receiver is always on, regardless
of the state of the on/off button.
3 GND