SEPTENTRIO PolaRx5, Руководство пользователя

Страница: 21 / 92

4.1. HOW TO CONF I GURE THE POLARX5 AS AN RTK BASE STAT I ON
Figure 4-2: Setting the static position of the reference station antenna
Click on ‘ Ok ’ to apply the new settings
Step 2: Configure output of correction data over Ethernet
Output of di ff erential corrections can be con fi gured in the Corrections Output window as
Figure 4-3 shows. Click on New RTCM3 output to start the sequence of con fi guration steps.
RTCMv3 is the most compact and robust di ff erential correction format and it is
recommended to use this format where possible.
Select the Ethernet port you wish to use avoiding the commands port (28784), the webserver
port (80), the FTP port (21) as well as the default NTR
I P port (2101) and the NTP port (123).
The example shown in Figure 4-3 uses port 28785.
The messages necessary for RTK and DGNSS are selected by default. A summary of other
RTK messages can be found in the
‘ PolaRx5 Reference Guide ’ .
21