3
SEP LEM012SJ 2015 V01
Never break the seals and open the front cover. This might influence the
functionality of the meter, and will be avoid any warranty.
Do not drop, or allow physical impact to the meter as there are high precision
components inside that may break or render the meter measure accurately.
Exclusion of liability
We have checked the contents of this publication and every effort has been made
to ensure that the descriptions are as accurate as possible.
However, deviations from the description cannot be completely ruled out, so that
no liability can be accepted for any errors or omissions contained in the
information given. The data in this manual are checked regularly and the
necessary corrections are included in subsequent editions. We are grateful for
any improvements that you care to suggest.
Copyright
Copyright (c) 2015 SEP EUROPE All rights Reserved.
It is prohibited to pass on or copy this document or to use or disclose its contents
without our express permission. Any duplication is a violation of the law and
subject to criminal and civil penalties. All rights reserved, particularly in the event
of a patent award or utility model registration.
Registered trademarks
SEP EUROPE is registered trademark of Schotman Elektro BV.
1.2 Foreword
Thank you for purchasing the SEP LEM012SJ DIN rail single phase two wire
energy meter. The LEM012SJ energy meter is an advanced type electronic (kWh)
energy meter. With the SEP product range we have introduced a large scale of
energy meters on the market suitable for 110VAC to 400VAC (50 or 60Hz).
Although we produce the SEP meter according to EN 50470-3 and our accurate
quality inspection, there might be a possibility that your product shows a fault or
failure for which we do apologize. Under normal conditions your product should
give you years of benefit and pleasure. In case there is a problem with the
energy meter you should contact your dealer immediately. All energy meters are
sealed with a special seal. Once this seal is broken there is no possibility to claim
(for) warranty. Therefore NEVER break the seal of the energy meter. The
warranty time is 12 months, after purchase, and only valid for construction
faults.