SEON Trooper TR4, Инструкция по установке и эксплуатации

Страница: 55 / 90

Configuring the DVR
700-0035 R004 3–21
3.2.7. Using the System/Defaults Menu
The System/Defaults menu allows controls of system level settings and functions
that should only be accessed by authorized individuals.
To view the System/Defaults menu:
1. On the main menu, press the
CH
3/Up arrow or
CH
4/Down arrow button to
highlight the setting you want to change.
2. Press the
ENTER
button.
The System/Defaults menu appears as shown in Figure 3-12.
To change a setting on the sub-menu:
1. Press the
CH
3/Up arrow or
CH
4/Down arrow button to highlight the setting
you want to change.
2. Press the
CH
1/Left or
CH
2/Right arrow button to change the value. Or turn the
JOG
wheel clockwise or counterclockwise to change the value.
3. To exit the menu, press the
MENU
button.
4. Repeat these steps to set the Alarm Buzzer, Format Disk, System Update,
Load Defaults, Format CF Card, and Password options. See Table 3-14.
Figure 3-12 System/Defaults menu
Table 3-14 System/Defaults configuration items
Menu Item Description Values Default
Alarm Buzzer
•
Alarm-in
• Disk Full
• Video Loss
See “Enabling the Alarm Buzzer, Alarm-in, Disk
Full, and Video Loss” on page 3–22.
ON
,
OFF OFF
Format Disk See “Formatting Disk (Hard Drive)” on page 3–23. •
NO
•
YES
- will erase all
information.
NO