SEON Trooper TR4, Инструкция по установке и эксплуатации

Страница: 57 / 90

Configuring the DVR
700-0035 R004 3–23
To enable/disable Alarm-in:
• Set both Alarm-in and Buzzer Enable to
ON
to sound the alarm buzzer if an
external Alarm Input is initiated. The buzzer sounds for the duration of the
alarm.
• Set the Alarm-In to
OFF
to disable this feature.
To enable/disable Disk Full:
• Set both Disk Full and Buzzer Enable to
ON
to sound the alarm buzzer if the
Repeat Record option is
ON
, and the hard drive has been filled with
information.
• Set Disk Full to
OFF
disable this feature.
To enable/disable Video Loss:
• Set both Video Loss and Buzzer Enable to
ON
to sound the alarm buzzer if the
video input to the DVR is not present. Possible causes include a broken
harness, an unplugged connector, or, very rarely, a damaged camera. The
buzzer will not turn off unless the video signal is restored, or the Buzzer
Enable is
OFF
in the menu.
• Set Video Loss to
OFF
to disable this feature.
3.2.7.2. Formatting Disk (Hard Drive)
Formatting the disk will erase all the information on the hard drive and set up the
proprietary file structure that the system uses to store information. When a new
hard drive is used in the DVR for the first time, it is important to format the disk.
See Figure 3-14.
To format the disk:
1. Use the
CH
3/Up or
CH
4/Down arrow button to select
YES
-
WILL ERASE ALL
INFORMATION
.
2. Press the
ENTER
button.
The screen displays “formatting.”
Figure 3-14
Formatting disk