SEON TL-HD, Инструкция по установке и эксплуатации

Страница: 67 / 94

DVR Configuration Menus
700-1014 R002 4–13
4.4.4. HD Camera Advanced Menu
The Advanced Settings menu is used to change the HD camera‘s IP subnet address.
These IP settings should only be changed if the HD camera subnet conflicts with the
DVR network subnet. If the IP address in this menu is edited, the IP address stored on
the camera must be similarly changed.
Contact Seon Support if you wish to edit settings on
this menu.
CAUTION: HD Camera Network
Contact Seon Support if you wish to edit settings on this menu.
In order for the DVR to communicate with other network equipment, the IP
Addresses, Subnet Mask, and HTTP port must be set correctly. If not set
correctly, communication failure including loss of recording will result.
Figure 4-12 HD Camera Advanced Settings Menus
Table 11 HD Camera Advanced Settings
Menu Item Description Value [Default]
DVR Camera-
Net IP
Address
Enter the DVR’s subnet IP address for communicating
with the attached HD camera.
[172.30.1.100]
Maximum 12 characters
Mask Enter a subnet mask, (12 characters maximum). The
DVR uses the Mask to auto-complete the common
segments of the HD Camera IP Address.
[255.255.255.0]
HD Camera
IP Address
Enter the attached HD camera’s subnet IP address (12
characters maximum).
[172.30.1.1]
HTTP Port Enter an HTTP port. [80], 1025 to 65535
HD Cam
Defaults
Click to reload the default settings for the IP addresses,
subnet mask, and HTTP port, and the HD Camera
menu settings.
Test Camera
Connection
Click to test camera connection. Green = working
Red = not working.